dmesg - SMC3108 - 8 x 16384 MB 2133MHz Samsung M393A2G40DB0-CPB

Return To SMC3108 - 8 x 16384 MB 2133MHz Samsung M393A2G40DB0-CPB System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-96-generic (buildd@lcy01-28) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #119~14.04.1-Ubuntu SMP Wed Sep 13 08:40:48 UTC 2017 (Ubuntu 4.4.0-96.119~14.04.1-generic 4.4.83)
Command line: BOOT_IMAGE=/vmlinuz-4.4.0-96-generic root=/dev/mapper/system-root ro console=ttyS0 console=tty1 ipv6.disable=1 elevator=deadline
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000099bff] usable
BIOS-e820: [mem 0x0000000000099c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007913ffff] usable
BIOS-e820: [mem 0x0000000079140000-0x0000000079a56fff] reserved
BIOS-e820: [mem 0x0000000079a57000-0x0000000079f77fff] ACPI NVS
BIOS-e820: [mem 0x0000000079f78000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: Supermicro X10DRH/X10DRH-CT, BIOS 3.1 06/18/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000080000000 mask 3FFF80000000 uncachable
  1 base 380000000000 mask 3F8000000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x79140 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce80-0x000fce8f] mapped at [ffff8800000fce80]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000093000] 93000 size 24576
Using GB pages for direct mapping
BRK [0x02211000, 0x02211fff] PGTABLE
BRK [0x02212000, 0x02212fff] PGTABLE
BRK [0x02213000, 0x02213fff] PGTABLE
RAMDISK: [mem 0x35394000-0x369c1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000079ABF0B0 0000E4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x0000000079AF07D8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x0000000079ABF230 0315A1 (v02 ALASKA A M I    01072009 INTL 20091013)
ACPI: FACS 0x0000000079F76F80 000040
ACPI: APIC 0x0000000079AF08E8 000294 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x0000000079AF0B80 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x0000000079AF0BC8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SPMI 0x0000000079AF0C68 000041 (v05 ALASKA A M I    00000000 AMI. 00000000)
ACPI: MCFG 0x0000000079AF0CB0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079AF0CF0 000042 (v01 ALASKA A M I    01072009      00000000)
ACPI: MCEJ 0x0000000079AF0D38 000130 (v01 INTEL           00000001 INTL 0100000D)
ACPI: HPET 0x0000000079AF0E68 000038 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: MSCT 0x0000000079AF0EA0 000090 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SLIT 0x0000000079AF0F30 000030 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: SRAT 0x0000000079AF0F60 001158 (v03 ALASKA A M I    00000001 INTL 20091013)
ACPI: WDDT 0x0000000079AF20B8 000040 (v01 ALASKA A M I    00000000 INTL 20091013)
ACPI: SSDT 0x0000000079AF20F8 01700F (v02 ALASKA PmMgt    00000001 INTL 20120913)
ACPI: NITR 0x0000000079B09108 000071 (v02 ALASKA A M I    00000001 INTL 20091013)
ACPI: SPCR 0x0000000079B09180 000050 (v01 A M I  APTIO V  01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000079B091D0 00264A (v02 ALASKA SpsNm    00000002 INTL 20120913)
ACPI: SSDT 0x0000000079B0B820 000064 (v02 ALASKA SpsNvs   00000002 INTL 20120913)
ACPI: PRAD 0x0000000079B0B888 0000BF (v02 ALASKA A M I    00000002 INTL 20120913)
ACPI: DMAR 0x0000000079B0B948 000128 (v01 ALASKA A M I    00000001 INTL 20091013)
ACPI: HEST 0x0000000079B0BA70 0000A8 (v01 ALASKA A M I    00000001 INTL 00000001)
ACPI: BERT 0x0000000079B0BB18 000030 (v01 ALASKA A M I    00000001 INTL 00000001)
ACPI: ERST 0x0000000079B0BB48 000230 (v01 ALASKA A M I    00000001 INTL 00000001)
ACPI: EINJ 0x0000000079B0BD78 000150 (v01 ALASKA A M I    00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x30 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 1 -> APIC 0x36 -> Node 1
SRAT: PXM 1 -> APIC 0x38 -> Node 1
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x31 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: PXM 1 -> APIC 0x37 -> Node 1
SRAT: PXM 1 -> APIC 0x39 -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
SRAT: Node 1 PXM 1 [mem 0x1080000000-0x207fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
NODE_DATA(0) allocated [mem 0x107fffb000-0x107fffffff]
NODE_DATA(1) allocated [mem 0x207fff8000-0x207fffcfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000207fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000098fff]
  node   0: [mem 0x0000000000100000-0x000000007913ffff]
  node   0: [mem 0x0000000100000000-0x000000107fffffff]
  node   1: [mem 0x0000001080000000-0x000000207fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
On node 0 totalpages: 16748760
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3992 pages, LIFO batch:0
  DMA32 zone: 7685 pages used for memmap
  DMA32 zone: 491840 pages, LIFO batch:31
  Normal zone: 253952 pages used for memmap
  Normal zone: 16252928 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000001080000000-0x000000207fffffff]
On node 1 totalpages: 16777216
  Normal zone: 262144 pages used for memmap
  Normal zone: 16777216 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x20] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x22] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x24] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x26] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x28] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x30] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x32] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x34] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x36] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x38] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x21] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x23] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x25] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x27] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x29] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x31] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x33] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x35] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x37] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x39] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 40 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00099000-0x00099fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x79140000-0x79a56fff]
PM: Registered nosave memory: [mem 0x79a57000-0x79f77fff]
PM: Registered nosave memory: [mem 0x79f78000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:40 nr_node_ids:2
PERCPU: Embedded 34 pages/cpu @ffff88103f800000 s98392 r8192 d32680 u262144
pcpu-alloc: s98392 r8192 d32680 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 20 21 22 23 24 25 
pcpu-alloc: [0] 26 27 28 29 -- -- -- -- [1] 10 11 12 13 14 15 16 17 
pcpu-alloc: [1] 18 19 30 31 32 33 34 35 [1] 36 37 38 39 -- -- -- -- 
Built 2 zonelists in Node order, mobility grouping on.  Total pages: 33002110
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.4.0-96-generic root=/dev/mapper/system-root ro console=ttyS0 console=tty1 ipv6.disable=1 elevator=deadline
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 159744 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 245976(93%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 131892984K/134103904K available (8270K kernel code, 1304K rwdata, 4004K rodata, 1496K init, 1316K bss, 2210920K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=40, Nodes=2
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=40.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=40
NR_IRQS:33024 nr_irqs:1560 16
Console: colour dummy device 80x25
console [tty1] enabled
console [ttyS0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2199.995 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=8799980)
pid_max: default: 40960 minimum: 320
ACPI: Core revision 20150930
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
ftrace: allocating 32174 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: APIC(20) Converting physical 1 to logical package 1
smpboot: Max logical packages: 4
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
DMAR: DRHD base: 0x000000c7ffc000 flags: 0x1
DMAR: dmar1: reg_base_addr c7ffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007bc19000 end: 0x0000007bc28fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000c7ffc000 proximity domain: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x1
DMAR-IR: IOAPIC id 3 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 1 under DRHD base  0xc7ffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base  0xc7ffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xc7ffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz (family: 0x6, model: 0x4f, stepping: 0x1)
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  #2  #3  #4  #5  #6  #7  #8  #9
.... node  #1, CPUs:   #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
.... node  #0, CPUs:   #20 #21 #22 #23 #24 #25 #26 #27 #28 #29
.... node  #1, CPUs:   #30 #31 #32 #33 #34 #35 #36 #37 #38 #39
x86: Booted up 2 nodes, 40 CPUs
smpboot: Total of 40 processors activated (176028.82 BogoMIPS)
devtmpfs: initialized
Using 2GB memory block size for large-memory system
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x79a57000-0x79f77fff] (5378048 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 16384 (order: 8, 1048576 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 23:52:21, date: 08/19/19
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD 0x0000000000000000 0000BF (v02 ALASKA A M I    00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:02: _OSC: platform does not support [AER]
acpi PNP0A03:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:02: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:6f80] type 00 class 0x088000
pci 0000:ff:08.2: [8086:6f32] type 00 class 0x110100
pci 0000:ff:08.3: [8086:6f83] type 00 class 0x088000
pci 0000:ff:09.0: [8086:6f90] type 00 class 0x088000
pci 0000:ff:09.2: [8086:6f33] type 00 class 0x110100
pci 0000:ff:09.3: [8086:6f93] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:6fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:6fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:6fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:6fe9] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [AER]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:6f80] type 00 class 0x088000
pci 0000:7f:08.2: [8086:6f32] type 00 class 0x110100
pci 0000:7f:08.3: [8086:6f83] type 00 class 0x088000
pci 0000:7f:09.0: [8086:6f90] type 00 class 0x088000
pci 0000:7f:09.2: [8086:6f33] type 00 class 0x110100
pci 0000:7f:09.3: [8086:6f93] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:6f81] type 00 class 0x088000
pci 0000:7f:0b.1: [8086:6f36] type 00 class 0x110100
pci 0000:7f:0b.2: [8086:6f37] type 00 class 0x110100
pci 0000:7f:0b.3: [8086:6f76] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:6fe0] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:6fe1] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:6fe2] type 00 class 0x088000
pci 0000:7f:0c.3: [8086:6fe3] type 00 class 0x088000
pci 0000:7f:0c.4: [8086:6fe4] type 00 class 0x088000
pci 0000:7f:0c.5: [8086:6fe5] type 00 class 0x088000
pci 0000:7f:0c.6: [8086:6fe6] type 00 class 0x088000
pci 0000:7f:0c.7: [8086:6fe7] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:6fe8] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:6fe9] type 00 class 0x088000
pci 0000:7f:0f.0: [8086:6ff8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:6ff9] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:6ffc] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:6ffd] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:6ffe] type 00 class 0x088000
pci 0000:7f:10.0: [8086:6f1d] type 00 class 0x088000
pci 0000:7f:10.1: [8086:6f34] type 00 class 0x110100
pci 0000:7f:10.5: [8086:6f1e] type 00 class 0x088000
pci 0000:7f:10.6: [8086:6f7d] type 00 class 0x110100
pci 0000:7f:10.7: [8086:6f1f] type 00 class 0x088000
pci 0000:7f:12.0: [8086:6fa0] type 00 class 0x088000
pci 0000:7f:12.1: [8086:6f30] type 00 class 0x110100
pci 0000:7f:13.0: [8086:6fa8] type 00 class 0x088000
pci 0000:7f:13.1: [8086:6f71] type 00 class 0x088000
pci 0000:7f:13.2: [8086:6faa] type 00 class 0x088000
pci 0000:7f:13.3: [8086:6fab] type 00 class 0x088000
pci 0000:7f:13.4: [8086:6fac] type 00 class 0x088000
pci 0000:7f:13.5: [8086:6fad] type 00 class 0x088000
pci 0000:7f:13.6: [8086:6fae] type 00 class 0x088000
pci 0000:7f:13.7: [8086:6faf] type 00 class 0x088000
pci 0000:7f:14.0: [8086:6fb0] type 00 class 0x088000
pci 0000:7f:14.1: [8086:6fb1] type 00 class 0x088000
pci 0000:7f:14.2: [8086:6fb2] type 00 class 0x088000
pci 0000:7f:14.3: [8086:6fb3] type 00 class 0x088000
pci 0000:7f:14.4: [8086:6fbc] type 00 class 0x088000
pci 0000:7f:14.5: [8086:6fbd] type 00 class 0x088000
pci 0000:7f:14.6: [8086:6fbe] type 00 class 0x088000
pci 0000:7f:14.7: [8086:6fbf] type 00 class 0x088000
pci 0000:7f:15.0: [8086:6fb4] type 00 class 0x088000
pci 0000:7f:15.1: [8086:6fb5] type 00 class 0x088000
pci 0000:7f:15.2: [8086:6fb6] type 00 class 0x088000
pci 0000:7f:15.3: [8086:6fb7] type 00 class 0x088000
pci 0000:7f:16.0: [8086:6f68] type 00 class 0x088000
pci 0000:7f:16.6: [8086:6f6e] type 00 class 0x088000
pci 0000:7f:16.7: [8086:6f6f] type 00 class 0x088000
pci 0000:7f:17.0: [8086:6fd0] type 00 class 0x088000
pci 0000:7f:17.4: [8086:6fb8] type 00 class 0x088000
pci 0000:7f:17.5: [8086:6fb9] type 00 class 0x088000
pci 0000:7f:17.6: [8086:6fba] type 00 class 0x088000
pci 0000:7f:17.7: [8086:6fbb] type 00 class 0x088000
pci 0000:7f:1e.0: [8086:6f98] type 00 class 0x088000
pci 0000:7f:1e.1: [8086:6f99] type 00 class 0x088000
pci 0000:7f:1e.2: [8086:6f9a] type 00 class 0x088000
pci 0000:7f:1e.3: [8086:6fc0] type 00 class 0x088000
pci 0000:7f:1e.4: [8086:6f9c] type 00 class 0x088000
pci 0000:7f:1f.0: [8086:6f88] type 00 class 0x088000
pci 0000:7f:1f.2: [8086:6f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x1000-0x7fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:6f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xc782c000-0xc782ffff 64bit]
pci 0000:00:04.1: [8086:6f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xc7828000-0xc782bfff 64bit]
pci 0000:00:04.2: [8086:6f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xc7824000-0xc7827fff 64bit]
pci 0000:00:04.3: [8086:6f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xc7820000-0xc7823fff 64bit]
pci 0000:00:04.4: [8086:6f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xc781c000-0xc781ffff 64bit]
pci 0000:00:04.5: [8086:6f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xc7818000-0xc781bfff 64bit]
pci 0000:00:04.6: [8086:6f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xc7814000-0xc7817fff 64bit]
pci 0000:00:04.7: [8086:6f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xc7810000-0xc7813fff 64bit]
pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xc7839000-0xc7839fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io  0x7110-0x7117]
pci 0000:00:11.4: reg 0x14: [io  0x7100-0x7103]
pci 0000:00:11.4: reg 0x18: [io  0x70f0-0x70f7]
pci 0000:00:11.4: reg 0x1c: [io  0x70e0-0x70e3]
pci 0000:00:11.4: reg 0x20: [io  0x7020-0x703f]
pci 0000:00:11.4: reg 0x24: [mem 0xc7838000-0xc78387ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc7800000-0xc780ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc7837000-0xc783700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xc7836000-0xc783600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc7834000-0xc78343ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc7833000-0xc78333ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x7070-0x7077]
pci 0000:00:1f.2: reg 0x14: [io  0x7060-0x7063]
pci 0000:00:1f.2: reg 0x18: [io  0x7050-0x7057]
pci 0000:00:1f.2: reg 0x1c: [io  0x7040-0x7043]
pci 0000:00:1f.2: reg 0x20: [io  0x7000-0x701f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc7832000-0xc78327ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc7831000-0xc78310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
pci 0000:01:00.0: [1000:005d] type 00 class 0x010400
pci 0000:01:00.0: reg 0x10: [io  0x6000-0x60ff]
pci 0000:01:00.0: reg 0x14: [mem 0xc7700000-0xc770ffff 64bit]
pci 0000:01:00.0: reg 0x1c: [mem 0xc7600000-0xc76fffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xc7500000-0xc75fffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:01.0:   bridge window [mem 0xc7500000-0xc77fffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:1528] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xc7c00000-0xc7dfffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [io  0x5020-0x503f]
pci 0000:03:00.0: reg 0x20: [mem 0xc7e04000-0xc7e07fff 64bit pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: reg 0x184: [mem 0xc7400000-0xc7403fff 64bit]
pci 0000:03:00.0: VF(n) BAR0 space: [mem 0xc7400000-0xc74fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:03:00.0: reg 0x190: [mem 0xc7300000-0xc7303fff 64bit]
pci 0000:03:00.0: VF(n) BAR3 space: [mem 0xc7300000-0xc73fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:03:00.1: [8086:1528] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xc7a00000-0xc7bfffff 64bit pref]
pci 0000:03:00.1: reg 0x18: [io  0x5000-0x501f]
pci 0000:03:00.1: reg 0x20: [mem 0xc7e00000-0xc7e03fff 64bit pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: reg 0x184: [mem 0xc7200000-0xc7203fff 64bit]
pci 0000:03:00.1: VF(n) BAR0 space: [mem 0xc7200000-0xc72fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:03:00.1: reg 0x190: [mem 0xc7100000-0xc7103fff 64bit]
pci 0000:03:00.1: VF(n) BAR3 space: [mem 0xc7100000-0xc71fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:03.2: PCI bridge to [bus 03-04]
pci 0000:00:03.2:   bridge window [io  0x5000-0x5fff]
pci 0000:00:03.2:   bridge window [mem 0xc7100000-0xc74fffff]
pci 0000:00:03.2:   bridge window [mem 0xc7a00000-0xc7efffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.4:   bridge window [mem 0xc6000000-0xc70fffff]
pci 0000:07:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xc6000000-0xc6ffffff]
pci 0000:07:00.0: reg 0x14: [mem 0xc7000000-0xc701ffff]
pci 0000:07:00.0: reg 0x18: [io  0x4000-0x407f]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0:   bridge window [io  0x4000-0x4fff]
pci 0000:06:00.0:   bridge window [mem 0xc6000000-0xc70fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: platform does not support [AER]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io  0x8000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window]
pci_bus 0000:80: root bus resource [bus 80-fe]
pci 0000:80:04.0: [8086:6f20] type 00 class 0x088000
pci 0000:80:04.0: reg 0x10: [mem 0xfbf1c000-0xfbf1ffff 64bit]
pci 0000:80:04.1: [8086:6f21] type 00 class 0x088000
pci 0000:80:04.1: reg 0x10: [mem 0xfbf18000-0xfbf1bfff 64bit]
pci 0000:80:04.2: [8086:6f22] type 00 class 0x088000
pci 0000:80:04.2: reg 0x10: [mem 0xfbf14000-0xfbf17fff 64bit]
pci 0000:80:04.3: [8086:6f23] type 00 class 0x088000
pci 0000:80:04.3: reg 0x10: [mem 0xfbf10000-0xfbf13fff 64bit]
pci 0000:80:04.4: [8086:6f24] type 00 class 0x088000
pci 0000:80:04.4: reg 0x10: [mem 0xfbf0c000-0xfbf0ffff 64bit]
pci 0000:80:04.5: [8086:6f25] type 00 class 0x088000
pci 0000:80:04.5: reg 0x10: [mem 0xfbf08000-0xfbf0bfff 64bit]
pci 0000:80:04.6: [8086:6f26] type 00 class 0x088000
pci 0000:80:04.6: reg 0x10: [mem 0xfbf04000-0xfbf07fff 64bit]
pci 0000:80:04.7: [8086:6f27] type 00 class 0x088000
pci 0000:80:04.7: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:80:05.0: [8086:6f28] type 00 class 0x088000
pci 0000:80:05.1: [8086:6f29] type 00 class 0x088000
pci 0000:80:05.2: [8086:6f2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:6f2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfbf20000-0xfbf20fff]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:07:00.0
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00099c00-0x0009ffff]
e820: reserve RAM buffer [mem 0x79140000-0x7bffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0400-0x047f] could not be reserved
system 00:01: [io  0x0580-0x059f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: [io  0x0a10-0x0a1f] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:02: [io  0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:01.0:   bridge window [mem 0xc7500000-0xc77fffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.2: PCI bridge to [bus 03-04]
pci 0000:00:03.2:   bridge window [io  0x5000-0x5fff]
pci 0000:00:03.2:   bridge window [mem 0xc7100000-0xc74fffff]
pci 0000:00:03.2:   bridge window [mem 0xc7a00000-0xc7efffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0:   bridge window [io  0x4000-0x4fff]
pci 0000:06:00.0:   bridge window [mem 0xc6000000-0xc70fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
pci 0000:00:1c.4:   bridge window [mem 0xc6000000-0xc70fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x1000-0x7fff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xc7ffbfff window]
pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:01: resource 1 [mem 0xc7500000-0xc77fffff]
pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xc7100000-0xc74fffff]
pci_bus 0000:03: resource 2 [mem 0xc7a00000-0xc7efffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xc6000000-0xc70fffff]
pci_bus 0000:07: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:07: resource 1 [mem 0xc6000000-0xc70fffff]
pci_bus 0000:80: resource 4 [io  0x8000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xc8000000-0xfbffbfff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:07:00.0: Video device with shadowed ROM
Unpacking initramfs...
Freeing initrd memory: 22712K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x75140000-0x79140000] (64MB) mapped at [ffff880075140000-ffff88007913ffff]
Intel CQM monitoring enabled
Intel MBM enabled
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1566258731.832:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
tsc: Refined TSC clocksource calibration: 2199.997 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb6300e510, max_idle_ns: 440795316804 ns
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc6000000, mapped to 0xffffc9000d000000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x4F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
clocksource: Switched to clocksource tsc
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xc7834000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-96-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xc7833000
usb 1-1: new high-speed USB device number 2 using ehci-pci
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-96-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-96-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-96-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb: port power management may be unreliable
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 3-14: new high-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-14: New USB device found, idVendor=0557, idProduct=7000
usb 3-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-14:1.0: USB hub found
hub 3-14:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-14.1: new low-speed USB device number 3 using xhci_hcd
usb 3-14.1: New USB device found, idVendor=0557, idProduct=2419
usb 3-14.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-14.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-14.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 40 microframes
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
IPv6: Loaded, but administratively disabled, reboot required to enable
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU1 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU2 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU3 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU4 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU5 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU6 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU7 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU8 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU9 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU10 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU11 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU12 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU13 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU14 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU15 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU16 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU17 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU18 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU19 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU20 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU21 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU22 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU23 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU24 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU25 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU26 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU27 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU28 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU29 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU30 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU31 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU32 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU33 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU34 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU35 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU36 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU37 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU38 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: CPU39 sig=0x406f1, pf=0x1, revision=0xb00002e
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 9375761a544a1e7b6671fbf3e9da54614663c762'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 15:221:909
rtc_cmos 00:00: setting system clock to 2019-08-19 23:52:40 UTC (1566258760)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1496K
Write protecting the kernel read-only data: 14336k
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
Freeing unused kernel memory: 1956K
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Freeing unused kernel memory: 92K
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
systemd-udevd[345]: starting version 204
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
megasas: 06.810.09.00-rc1
ahci 0000:00:11.4: version 3.0
pps_core: LinuxPPS API ver. 1 registered
megaraid_sas 0000:01:00.0: FW now in Ready state
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst 
megaraid_sas 0000:01:00.0: firmware supports msix	: (96)
megaraid_sas 0000:01:00.0: current msix/online cpus	: (40/40)
megaraid_sas 0000:01:00.0: RDPQ mode	: (disabled)
megaraid_sas 0000:01:00.0: Current firmware maximum commands: 928	 LDIO threshold: 0
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: SATA max UDMA/133 abar m2048@0xc7838000 port 0xc7838100 irq 32
ata2: SATA max UDMA/133 abar m2048@0xc7838000 port 0xc7838180 irq 32
ata3: SATA max UDMA/133 abar m2048@0xc7838000 port 0xc7838200 irq 32
ata4: SATA max UDMA/133 abar m2048@0xc7838000 port 0xc7838280 irq 32
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
megaraid_sas 0000:01:00.0: Init cmd success
megaraid_sas 0000:01:00.0: firmware type	: Extended VD(240 VD)firmware
megaraid_sas 0000:01:00.0: controller type	: MR(2048MB)
megaraid_sas 0000:01:00.0: Online Controller Reset(OCR)	: Enabled
megaraid_sas 0000:01:00.0: Secure JBOD support	: Yes
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
ata5: SATA max UDMA/133 abar m2048@0xc7832000 port 0xc7832100 irq 75
ata6: SATA max UDMA/133 abar m2048@0xc7832000 port 0xc7832180 irq 75
ata7: SATA max UDMA/133 abar m2048@0xc7832000 port 0xc7832200 irq 75
ata8: SATA max UDMA/133 abar m2048@0xc7832000 port 0xc7832280 irq 75
ata9: SATA max UDMA/133 abar m2048@0xc7832000 port 0xc7832300 irq 75
ata10: SATA max UDMA/133 abar m2048@0xc7832000 port 0xc7832380 irq 75
megaraid_sas 0000:01:00.0: INIT adapter done
megaraid_sas 0000:01:00.0: pci id		: (0x1000)/(0x005d)/(0x15d9)/(0x0809)
megaraid_sas 0000:01:00.0: unevenspan support	: no
megaraid_sas 0000:01:00.0: firmware crash dump	: yes
megaraid_sas 0000:01:00.0: jbod sync map		: yes
scsi host0: Avago SAS based MegaRAID driver
scsi 0:2:0:0: Direct-Access     AVAGO    SMC3108          4.68 PQ: 0 ANSI: 5
sd 0:2:0:0: [sda] 3905945600 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:2:0:0: [sda] 4096-byte physical blocks
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda3 sda4
sd 0:2:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
random: lvm: uninitialized urandom read (4 bytes read, 86 bits of entropy available)
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.0/0003:0557:2419.0001/input/input2
hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-14.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/3-14.1:1.1/0003:0557:2419.0002/input/input3
hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-14.1/input1
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
dca service started, version 1.12.1
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
ixgbe: Copyright (c) 1999-2015 Intel Corporation.
random: lvm: uninitialized urandom read (4 bytes read, 120 bits of entropy available)
ixgbe 0000:03:00.0: Multiqueue Enabled: Rx Queue count = 40, Tx Queue count = 40
ixgbe 0000:03:00.0: PCI Express bandwidth of 32GT/s available
ixgbe 0000:03:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:03:00.0: MAC: 3, PHY: 0, PBA No: 030C00-000
ixgbe 0000:03:00.0: 0c:c4:7a:de:c7:a2
ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:03:00.1: Multiqueue Enabled: Rx Queue count = 40, Tx Queue count = 40
ixgbe 0000:03:00.1: PCI Express bandwidth of 32GT/s available
ixgbe 0000:03:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:03:00.1: MAC: 3, PHY: 0, PBA No: 030C00-000
ixgbe 0000:03:00.1: 0c:c4:7a:de:c7:a3
ixgbe 0000:03:00.1: Intel(R) 10 Gigabit Network Connection
random: nonblocking pool is initialized
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
Adding 31248380k swap on /dev/mapper/system-swap.  Priority:-1 extents:1 across:31248380k FS
EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
systemd-udevd[1268]: starting version 204
lp: driver loaded but no devices found
wmi: Mapper loaded
ipmi message handler version 39.2
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io  0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ioatdma: Intel(R) QuickData Technology Driver 4.00
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC MC0: Giving out device to module sbridge_edac.c controller Broadwell Socket#0: DEV 0000:ff:12.0 (POLLED)
EDAC MC1: Giving out device to module sbridge_edac.c controller Broadwell Socket#1: DEV 0000:7f:12.0 (POLLED)
EDAC sbridge:  Ver: 1.1.1 
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0859, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
IPMI SSIF Interface driver
[drm] Initialized drm 1.1.0 20060810
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] Using P2A bridge for configuration
[drm] AST 2400 detected
[drm] Analog VGA only
[drm] dram 1632000000 1 16 01000000
[TTM] Zone  kernel: Available graphics memory: 65959636 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
checking generic (c6000000 130000) vs hw (c6000000 1000000)
fb: switching to astdrmfb from VESA VGA
Console: switching to colour dummy device 80x25
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
ast 0000:07:00.0: fb0: astdrmfb frame buffer device
[drm] Initialized ast 0.1.0 20120228 for 0000:07:00.0 on minor 0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
audit: type=1400 audit(1566258781.405:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1562 comm="apparmor_parser"
audit: type=1400 audit(1566258781.405:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1562 comm="apparmor_parser"
audit: type=1400 audit(1566258781.405:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1562 comm="apparmor_parser"
audit: type=1400 audit(1566258781.405:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1561 comm="apparmor_parser"
audit: type=1400 audit(1566258781.405:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1561 comm="apparmor_parser"
audit: type=1400 audit(1566258781.405:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1561 comm="apparmor_parser"
audit: type=1400 audit(1566258781.405:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1563 comm="apparmor_parser"
audit: type=1400 audit(1566258781.405:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1563 comm="apparmor_parser"
audit: type=1400 audit(1566258781.405:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1563 comm="apparmor_parser"
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
8021q: 802.1Q VLAN Support v1.8
8021q: adding VLAN 0 to HW filter on device bond0
bond0: Setting xmit hash policy to layer3+4 (1)
bond0: Setting MII monitoring interval to 100
8021q: adding VLAN 0 to HW filter on device bond0
bond0: Adding slave eth0
pps pps0: new PPS source ptp0
ixgbe 0000:03:00.0: registered PHC device on eth0
8021q: adding VLAN 0 to HW filter on device eth0
bond0: Enslaving eth0 as a backup interface with a down link
bond0: Adding slave eth1
pps pps1: new PPS source ptp1
ixgbe 0000:03:00.1: registered PHC device on eth1
8021q: adding VLAN 0 to HW filter on device eth1
bond0: Enslaving eth1 as a backup interface with a down link
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
init: failsafe main process (2273) killed by TERM signal
ixgbe 0000:03:00.0 eth0: NIC Link is Up 10 Gbps, Flow Control: RX/TX
bond0: link status definitely up for interface eth0, 10000 Mbps full duplex
bond0: Warning: No 802.3ad response from the link partner for any adapters in the bond
bond0: first active interface up!
ixgbe 0000:03:00.1 eth1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
bond0: link status definitely up for interface eth1, 10000 Mbps full duplex
ixgbe 0000:03:00.1 eth1: NIC Link is Down
bond0: link status definitely down for interface eth1, disabling it
ixgbe 0000:03:00.1 eth1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
bond0: link status definitely up for interface eth1, 10000 Mbps full duplex
audit: type=1400 audit(1566258790.925:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=2487 comm="apparmor_parser"
audit: type=1400 audit(1566258790.925:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2487 comm="apparmor_parser"
audit: type=1400 audit(1566258790.925:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2487 comm="apparmor_parser"
audit: type=1400 audit(1566258790.945:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=2489 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
init: upstart-udev-bridge main process (1263) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (1639) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (2332) terminated with status 1
init: upstart-file-bridge main process ended, respawning
systemd-udevd[38780]: starting version 204
audit: type=1400 audit(1566317163.633:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=39016 comm="apparmor_parser"
audit: type=1400 audit(1566317163.633:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=39016 comm="apparmor_parser"
audit: type=1400 audit(1566317163.633:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=39016 comm="apparmor_parser"
audit: type=1400 audit(1566317165.149:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=39254 comm="apparmor_parser"
audit: type=1400 audit(1566317165.185:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=39252 comm="apparmor_parser"
audit: type=1400 audit(1566317165.185:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=39252 comm="apparmor_parser"
audit: type=1400 audit(1566317165.185:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=39252 comm="apparmor_parser"
audit: type=1400 audit(1566317165.337:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=39314 comm="apparmor_parser"
audit: type=1400 audit(1566317165.353:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=39313 comm="apparmor_parser"
audit: type=1400 audit(1566317165.353:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=39313 comm="apparmor_parser"
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1   gen()  6961 MB/s
raid6: sse2x1   xor()  5852 MB/s
raid6: sse2x2   gen()  9632 MB/s
raid6: sse2x2   xor()  6365 MB/s
raid6: sse2x4   gen() 11260 MB/s
raid6: sse2x4   xor()  7939 MB/s
raid6: avx2x1   gen() 15236 MB/s
raid6: avx2x2   gen() 17791 MB/s
raid6: avx2x4   gen() 20375 MB/s
raid6: using algorithm avx2x4 gen() 20375 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
   avx       : 24102.000 MB/sec
Btrfs loaded
perf interrupt took too long (5030 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf interrupt took too long (10023 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
TCP: request_sock_TCP: Possible SYN flooding on port 8089. Sending cookies.  Check SNMP counters.

Return To SMC3108 - 8 x 16384 MB 2133MHz Samsung M393A2G40DB0-CPB System Information